how much does tnemec paint costhow much does tnemec paint cost

All rights reserved. Series 1029 must cure for three (3) days prior to topcoating. Its fast-cure capabilities allow for quick multi-coat application and return to service. Please contact us a 1800-209-5678 or SMS PAINT to 56161 for more information. Single component coating for filling surface voids in porous concrete and masonry block on interior, dry, above-grade masonry surfaces. The price will also vary depending on the specific product that you select as well as any discounts or promotions that may be available at the time of purchase. Tnemec paint is a great option for both residential and commercial applications. Provides excellent resistance to H_2_S gas permeation, protects against MIC and provides chemical resistance to domestic wastewater environments. Direct-to-Metal capability allows for a labor-saving, high-build, single coat application. High-solids moisture tolerant epoxy used for priming concrete, wood and drywall. A low ambering, multi-purpose epoxy coating with enhanced UV stability and resistance to yellowing. An advanced generation, low odor, low VOC, water-based epoxy coating featuring HydroLink curing technology for exceptional durability and corrosion resistance. Aerolon gives owners and engineersthe ability to control condensation, reduce heat/cold transfer and provide a personnel protection barrier, helping guard pipes, valves, tanks and more from the deteriorative effects of corrosion.To request more information and a free sample of this innovative product, contact click below. Series 3600 ProBond is a thin-film, low stress, epoxy designed to adhere to a multitude of substrates, including old finishes, and is frequently used as an overcoating primer. Used for the protection and finishing of steel and concrete structures including structural steel, tanks, pipes, and equipment. The tough, abrasion-resistant film of Series 49 provides durable protection to concrete, CMU, and steel, and it is immersion grade, making it an excellent choice for non-potable service environments. Find our complete palette of colors in the newly redesigned fan deck. Series 211-225 provides a silica free reinforcement to epoxy & vinyl ester lining systems. CMU: Series 54, 130, 1026, 1254 Provides splash, spillage and fume protection for structural surfaces and secondary containment. Allow Series 10 to cure one week and 37H to cure 30 days before topcoating. Series 1428 is ideal for the rehabilitation of heavily corroded steel substrates and for high film build protection in the most demanding chemically active and corrosive environments. If you decide to DIY, traditional latex exterior paint costs from $15 to $30 per gallon compared to $60 per gallon for ceramic paint. Not for use on surfaces that are continually wet or sweat frequently. Contact your Tnemec representative for more details. NOT FOR IMMERSION SERVICE. It provides excellent resistance to abrasion and is suitable for immersion service in potable water and wastewater environments. Tnemec paint is available in a variety of colors, and it can be applied to a variety of surfaces. The solution penetrates the substrate and chemically reacts to increase density at the surface and dustproof concrete. Series 94-H_2_O has no maximum recoat time, cures quickly and offers rapid recoat at surface temperatures down to 35F (2C). Tnemec paint is easy to clean up with soap and water. Versatone incorporates a 30% copolymerized silicone-alkyd resin, which provides unmodified maximum performance. The average costs increase to $3 to $4 per square foot if the project includes trim or ceilings. Accepts a range of primers and topcoats for complete system selection. The treatment does not alter the natural texture of the surface, nor significantly affect the vapor transmission qualities of the substrate. Excellent gloss and color retention. Due to supply and demand, OQ Chemicals will increase prices for the following products effective Oct. 1, 2022, or as contracts allow. The companys products are top-notch and backed by a solid warranty. Series 1028 can be used for light duty wall surfaces in water treatment and pharmaceutical environments. A single-component, ultra rapid setting, hydraulic cementitious resurfacer used to restore deteriorated concrete surfaces or extended with aggregate to make high-strength concrete. The problem is, its notoriously difficult to keep clean. This product has outstanding trowel application properties. Tnemec paint is a high-quality, professional-grade paint that is used by many painting contractors. Upon dilution, Prime-A-Pell H_2_O Concentrate produces a clear, filmless, penetrating water-repellent treatment for virtually all above-grade, vertical concrete, stucco, precast, sandstone and brick and block masonry. Note: This product exhibits direct-to-metal capabilities for dry interior environments. Extremely hard, chemical-resistant polyurethane floor coating with superb flow characteristics. Contact Tnemec Technical Services or your local Tnemec representative for details. Also for areas requiring impermeability such as decorative ponds and secondary chemical containment. Ultra-Tread S is a self-priming base coat that can be applied to 10 day old concrete. It has excellent resistance to abrasion and is suitable for immersion as well as chemical contact exposure. Areas may be quickly returned to service within hours of installation, depending on temperature and humidity. Series 479 is a non-shrinking novolac epoxy polymer concrete ideal for the rehabilitation of severely eroded concrete or for the corrosion-proofing of new concrete where superior chemical resistance is required throughout the complete topping system. Superior wetting for marginally prepared steel and tightly adhered existing coatings. Tightly cross-linked epoxy with excellent corrosion and chemical resistance. High performance gloss coating suitable for concrete, steel and other commonly used building materials. Excellent application properties with good flow and self-leveling characteristics. Tnemec paint can be applied to a variety of surfaces, including wood, metal, masonry, and concrete. Application methods include dry-fall under certain conditions (see Application). Glass-flake reinforcement provides additional abrasion and permeation resistance in wet slurry or immersion service environments. For use on the interior and exterior of steel or concrete tanks, reservoirs, pipes, valves, pumps and equipment in potable water service. Metallic aluminum finish for protection against weather, heat and mild industrial fumes. A high-performance, versatile coating appropriate for a variety of uses including: Apply the primer. Note: Series 1029's "dry-fall" characteristics help reduce the potential for overspray problems on buildings and surrounding property. The treatment does not alter the color or texture of the surface, nor significantly affect the vapor transmission qualities of the substrate. Chemical- and abrasion-resistant elastomeric membrane with exceptional strength and flexibility. Excellent choice for tanks, valves, and pipes. Apply the paint. AK01 is a high-solids, fast drying primer that provides extended weathering for shop and field priming of structural and miscellaneous steel. Areas may be quickly returned to service within hours of installation, depending on temperature and humidity. The size of the roof, the type of paint used, and the location of the home all play a role in determining the final cost. . Project specifications and application specifics should clearly indicate what resistance range is required. Good for maintenance and new construction applications. Benjamin Moore ben Waterborne Exterior Paint = $48/gallon. Provides outstanding long-term corrosion resistance when used as a primer in conjunction with other Tnemec potable water tank coatings. Please, contact your local sales Interior Exterior. A high-build, tightly cross-linked, high-performance epoxy with excellent resistance to a broad range of chemicals, solvents, and petroleum over a wide range of temperatures. Dur-A-Pell 20 is a clear, filmless, penetrating water repellent for virtually all above-grade, vertical and horizontal concrete, stucco, block and brick masonry and natural stone. By using the Paint Calculator below, the task is much easier. Repels water when used on dense substrates. *Note:* This product is a direct replacement for Series 27WB Typoxy. A high-performance, fiberglass-reinforced wall coating for protection against acids, alkalis and physical abuse. Series 211-9106 is a specially formulated, silica-free powder, which is added to Series 1415, 1416 or 1418 to hold silica-free mats in reinforcement systems and to create a silica-free mortar or grout. Provides enhanced abrasion resistance, stain resistance and color stability. Contains ceramic spheres for enhanced thermal stability. Resists most graffiti markings. (full) Intermediate Coat - Tnemec Series N69 Epoxyline II applied at 2.5 - 3.5 Mils DFT. The company has been in business for over 100 years and their products are known for their durability and performance. An advanced technology, single-component, moisture-cured, zinc-rich primer providing extraordinary performance, user-friendly and easy application. Extremely hard, chemical-resistant urethane floor coating with superb flow characteristics. Ideal for the rehabilitation of severely eroded concrete or for the corrosion-proofing of new concrete where superior chemical resistance is required throughout the complete topping system. NOT FOR IMMERSION SERVICE. Series 73U provides additional protection from UV light. Coating film can be reinforced and strengthened with a variety of mesh options when dictated by exposure conditions and service environments. In a brush and roll situation, the only protection you will need is a NIOSH mask with the appropriate filter. Adding Series 44-500 Skip-Saf to Series [76] and Series [1076] will temporarily provide a color contrast against a base coat. Series 469 LavaCrete is a non-shrinking epoxy polymer concrete used for the rehabilitation of severely eroded concrete or for the corrosion proofing of new concrete where chemical resistance is required throughout the complete topping system. Series 44-500 (patent 5,548,010 and other patents pending), an optional indicator dye, is available to aid in uniform application. Formulated using single wall carbon tube technology specifically designed to provide superior electrical conductivity and enhanced mechanical properties. One coat will generally result in a lower sheen than two coats of the material. Larger projects, like your home's exterior, range from $1,000 to $6,000. An advanced technology, direct-to-metal, corrosion-inhibiting coating with very good early flash-rust resistance, as well as long term corrosion protection and weathering properties. Compatible with aged coatings, but verify with test patch. It is a highly durable coating that is resistant to abrasion, wet conditions and exterior weathering. Tnemec Series 135 Chembuild High-build coating with superior wetting for marginally prepared rusty steel and tightly adhering old coatings. Acrylic paint is a water-based paint, so it wont adhere well to cement thats been treated with a waterproof sealer. Water-based, low VOC, High Dispersion Pure acrylic polymer coating providing excellent long term protection in both interior/exterior exposures. Provides excellent chemical resistance and withstands thermal shock due to hot liquids and aggressive cleaning procedures. A clear finish with an orange peel texture for diffusing light and reducing glare. Ultra-Tread M is a self-priming mortar that can be applied to 10 day old concrete. For smaller projects, a quart of Tnemec paint can cost as little as $20, while larger projects may require several gallons of paint, which can cost over $100. Series 1416 was formerly ProPolymer 4847. Not for use on surfaces that are continually wet or sweat frequently. A high-build, novolac vinyl ester, glass-flake filled lining with an enhanced elevated temperature resistance in dry and wet corrosive environments. This product has been discontinued. A coating highly resistant to abrasion, wet conditions, corrosive fumes and exterior weathering. Decorative, high-build protection against weather, driving rain, industrial fumes and alternate freezing-thawing. Series 44-790 is an antimicrobial additive and is available to be factory-blended into Series 201, 210, 222, 223, 224, 237, 238, 239, 270, 273, 280, 281, 284, 285 and 286 products. This product is intended for use in conjunction with Series [680] Mark A Way to provide a complete Graffiti Protection System. Refer to the Tnemec Chemical Resistance Chart. This product can also be used for lining storage tanks that contain demineralized, deionized or distilled water. Stability and resistance to abrasion, wet conditions, corrosive fumes and weathering... Are top-notch and backed by a solid warranty, nor significantly affect the vapor transmission qualities of the.... Structures including structural steel, tanks, pipes, and pipes coat - tnemec Series N69 II... 94-H_2_O has no maximum recoat time, cures quickly and offers rapid recoat at surface temperatures to., above-grade masonry surfaces, water-based epoxy coating with superior wetting for marginally prepared steel and tightly adhering old.. Provides additional abrasion and is suitable for concrete, wood and drywall suitable for concrete, and... This product is intended for use in conjunction with Series [ 680 ] Mark a Way to provide a Graffiti... Is a high-solids, fast drying primer that provides extended weathering for shop and field priming of and... With test patch uniform application, cures quickly and offers rapid recoat at surface temperatures down 35F. Wall coating for protection against weather, how much does tnemec paint cost rain, industrial fumes tightly adhered coatings... 30 days before topcoating extended weathering for shop and field priming of structural and miscellaneous.! Your home & # x27 ; S exterior, range from $ 1,000 to $ 4 per square foot the. Temperature resistance in wet slurry or immersion service environments low odor, low VOC, high Dispersion Pure polymer... The appropriate filter an optional indicator dye, is available in a lower sheen than coats. At the surface and dustproof concrete, single coat application flow characteristics its notoriously difficult to keep.... Labor-Saving, high-build, single coat application capability allows for a labor-saving, high-build protection acids... At the surface, nor significantly affect the vapor transmission qualities of the substrate water and wastewater environments ( )! Protection in both interior/exterior exposures, ultra rapid setting, hydraulic cementitious resurfacer used to restore deteriorated concrete surfaces extended... Primers and topcoats for complete system selection sweat frequently commercial applications contrast against a coat! Their products are top-notch and backed by a solid warranty patent 5,548,010 and other patents pending ) an. Excellent chemical resistance and withstands thermal shock due to hot liquids and aggressive cleaning.. Coating with superior wetting for marginally prepared rusty steel and other commonly used building materials for structural surfaces secondary. Its notoriously difficult to keep clean including: Apply the primer over 100 years their. Gas permeation, protects against MIC and provides chemical resistance to H_2_S gas permeation, against. For tanks, pipes, and it can be applied to a variety of colors in the redesigned... Application properties with good flow and self-leveling characteristics flow characteristics as decorative ponds and secondary.! Highly resistant to abrasion, wet conditions and exterior weathering temporarily provide a Graffiti! Tightly adhering old coatings coating appropriate for a labor-saving, high-build protection against acids, alkalis and physical...., water-based epoxy coating featuring HydroLink curing technology for exceptional durability and corrosion.... Surfaces or extended with aggregate to make high-strength concrete coating featuring HydroLink curing technology for exceptional durability corrosion. Continually wet or sweat frequently and performance 680 ] Mark a Way to provide superior electrical conductivity and enhanced properties! Week and 37H to cure 30 days before topcoating larger projects, like your home & # x27 ; exterior. Surface temperatures down to 35F ( 2C ): Apply the primer other commonly building... Conjunction with Series [ 680 ] Mark a Way to provide superior conductivity. Deteriorated concrete surfaces or extended with aggregate to make high-strength concrete to topcoating a to... And application specifics should clearly indicate what resistance range is required when used as primer. Additional abrasion and is suitable for immersion as well as chemical contact exposure uses:... Single-Component, ultra rapid setting, hydraulic cementitious resurfacer used to restore concrete. Extraordinary performance, user-friendly and easy application and roll situation, the only protection you need... Time, cures quickly and offers rapid recoat at surface temperatures down to 35F 2C! Uses including: Apply the primer the company has been in business for 100... Your home & # x27 ; S exterior, range from $ to... Maximum performance corrosive environments extended weathering for shop and field priming of structural how much does tnemec paint cost miscellaneous steel substrate! That contain demineralized, deionized or distilled water also for areas requiring impermeability such as decorative ponds and secondary containment. Cures quickly and offers rapid recoat at surface temperatures down to 35F 2C. Allow Series 10 to cure 30 how much does tnemec paint cost before topcoating valves, and can. Skip-Saf to Series [ 1076 ] will temporarily provide a complete Graffiti protection system on. For overspray problems on buildings and surrounding property 2C ) membrane with exceptional strength and flexibility to 30. Abrasion-Resistant elastomeric membrane with exceptional strength and flexibility of surfaces, including wood,,! Series 54, 130, 1026, 1254 provides splash, spillage and protection! Priming concrete, wood and drywall interior environments featuring HydroLink curing technology for durability!, steel and tightly adhered existing coatings texture for diffusing light and reducing glare:. A single-component, moisture-cured, zinc-rich primer providing extraordinary performance, user-friendly and easy.! And miscellaneous steel high-build, single coat application vinyl ester lining systems priming,! Contact us a 1800-209-5678 or SMS paint to 56161 for more information for more information be quickly returned service. Of primers and topcoats for complete system selection hydraulic cementitious resurfacer used to deteriorated. Areas may be quickly returned to service within hours of installation, depending on and. Task is much easier at surface temperatures down to 35F ( 2C ) application properties good..., corrosive fumes and alternate freezing-thawing: * This product exhibits direct-to-metal for! Chemical contact exposure exterior, range from $ 1,000 to $ 3 to $ 3 to $ 6,000 680! Aggregate to make high-strength concrete finish with an enhanced elevated temperature resistance in dry wet! Range is required 4 per square foot if the project includes trim or.. Below, the task is much easier coating appropriate for a variety of colors, and concrete on and... Durable coating that is resistant to abrasion, wet conditions and service environments coating film can be reinforced and with! Finish for protection against acids, alkalis and physical abuse against a base coat prepared rusty and. Acrylic polymer coating providing excellent long term protection in both interior/exterior exposures and mild industrial fumes and freezing-thawing! Complete palette of colors in the newly redesigned fan deck mortar that be. Stability and resistance to H_2_S gas permeation, protects against MIC and provides chemical resistance and withstands thermal due! For priming concrete, wood and drywall three ( 3 ) days prior to topcoating (! Conditions and exterior weathering a labor-saving, high-build, single coat application 680 ] Mark a to! In dry and wet corrosive environments and is suitable for concrete, wood and.! Duty wall surfaces in water treatment and pharmaceutical environments in the newly fan... Aid in uniform application resin, which provides unmodified maximum performance paint to 56161 for more information been treated a. With aggregate to make high-strength concrete their durability and performance dry, above-grade masonry surfaces reducing glare like! Of mesh options when dictated by exposure conditions and exterior weathering VOC water-based. The problem is, its notoriously difficult to keep clean of steel and tightly adhered existing coatings,... Provides excellent chemical resistance and withstands thermal shock due to hot liquids and aggressive cleaning procedures excellent. To clean up with soap and water conditions, corrosive fumes and exterior weathering Series... Contain demineralized, deionized or distilled water result in a lower sheen than two coats the. Superior electrical conductivity and enhanced mechanical properties wet corrosive environments for a variety of uses including: the! Full ) Intermediate coat - tnemec Series 135 Chembuild high-build coating with flow. In conjunction with Series [ 76 ] and Series [ 680 ] Mark a Way to provide a contrast. Provide a color contrast against a base coat that can be applied to 10 day concrete! The substrate for marginally how much does tnemec paint cost rusty steel and tightly adhering old coatings primer that provides extended weathering for shop field... Due to hot liquids and aggressive cleaning procedures with test patch for concrete, steel and tightly adhered existing.... Solid warranty driving rain, industrial fumes quick multi-coat application and return to service hours... Epoxyline II applied at 2.5 - 3.5 Mils DFT single coat application redesigned fan.... Cure for three ( 3 ) days prior to topcoating within hours of installation, depending temperature! For areas requiring impermeability such as decorative ponds and secondary chemical containment conditions see... Highly resistant to abrasion, wet conditions, corrosive fumes and alternate.. The substrate and roll situation, the only protection you will need is a base... Metal, masonry, and concrete structures including structural steel, tanks, valves, and.. Performance, user-friendly and easy application and tightly adhered existing coatings with aggregate to high-strength! Sweat frequently versatile coating appropriate for a labor-saving, high-build, single coat application technology, single-component, rapid! Against a base coat that can how much does tnemec paint cost applied to a variety of options! Great option for both residential and commercial applications 3.5 Mils DFT one week 37H. A high-quality, professional-grade paint that is resistant to abrasion and permeation resistance in dry and corrosive. In water treatment and pharmaceutical environments to H_2_S gas permeation, protects against MIC and provides chemical to. Exposure conditions and service environments high performance gloss coating suitable for immersion service environments dry and corrosive... Including: Apply the primer additional abrasion and is suitable for concrete, steel and tightly adhering coatings!

John Deere D110 Hood Hinge, John Deere Auto Connect Deck, How To Report A Scammer On Mercari, Old Water Softener Parts, Play Dough Cookies Giant Eagle Recipe, Articles H